Re: [Solved] No USB Sound 2.1 kit, reset Audio device with sysctl. Restart applications to pickup new change.
execute command: sudo kldload snd_driver
ls -lh /boot/kernel/snd*.ko
-r-xr-xr-x 1 root wheel 13592 Sep 22 06:25 /boot/kernel/snd_driver.ko
cat /dev/sndstat ; sysctl hw.snd.default_unit ; sysctl hw.snd.default_unit=3 or unit=2 or unit=1 or unit=0 , whatever output of cat /dev/sndstat says
dmesg | tail -23 will show you when you plugged in a USB Audio device like USB Audio adapter and USB Audio Headset Logitech H390
Read Vermaden's blog post write up
https://vermaden.wordpress.com/2024/01/ ... rovements/ Vermaden's 10/January/2024 write up on configuring USB Audio setup for FreeBSD
https://t.me/ghostbsd/143999/153506
execute command: sudo kldload snd_driver
ls -lh /boot/kernel/snd*.ko
-r-xr-xr-x 1 root wheel 13592 Sep 22 06:25 /boot/kernel/snd_driver.ko
cat /dev/sndstat ; sysctl hw.snd.default_unit ; sysctl hw.snd.default_unit=3 or unit=2 or unit=1 or unit=0 , whatever output of cat /dev/sndstat says
dmesg | tail -23 will show you when you plugged in a USB Audio device like USB Audio adapter and USB Audio Headset Logitech H390
Read Vermaden's blog post write up
https://vermaden.wordpress.com/2024/01/ ... rovements/ Vermaden's 10/January/2024 write up on configuring USB Audio setup for FreeBSD
https://t.me/ghostbsd/143999/153506
Testing USB Headset Logitech H390 on a Raspberry Pi. See insertion of USB Device uhid1 on uhub1 ?cat /dev/sndstat ; sysctl hw.snd.default_unit
Installed devices:
pcm0: <VCHIQ audio> (play)
pcm1: <USB audio> (play/rec) default
No devices installed from userspace.
hw.snd.default_unit: 1
dmesg | tail -33
genet0: link state changed to UP
usb_alloc_device: set address 6 failed (USB_ERR_TIMEOUT, ignored)
ugen0.6: <Logitech USB Headset Logitech USB Headset> at usbus0
uhid1 on uhub1
uhid1: <Logitech USB Headset Logitech USB Headset, class 0/0, rev 1.10/0.12, addr 6> on usbus0
uaudio0 on uhub1
uaudio0: <Logitech USB Headset> on usbus0
uaudio0: Play[0]: 48000 Hz, 2 ch, 16-bit S-LE PCM format, 2x2ms buffer.
uaudio0: Play[0]: 44100 Hz, 2 ch, 16-bit S-LE PCM format, 2x2ms buffer.
uaudio0: Play[0]: 32000 Hz, 2 ch, 16-bit S-LE PCM format, 2x2ms buffer.
uaudio0: Play[0]: 22050 Hz, 2 ch, 16-bit S-LE PCM format, 2x2ms buffer.
uaudio0: Play[0]: 16000 Hz, 2 ch, 16-bit S-LE PCM format, 2x2ms buffer.
uaudio0: Play[0]: 11025 Hz, 2 ch, 16-bit S-LE PCM format, 2x2ms buffer.
uaudio0: Play[0]: 8000 Hz, 2 ch, 16-bit S-LE PCM format, 2x2ms buffer.
uaudio0: Record[0]: 48000 Hz, 1 ch, 16-bit S-LE PCM format, 2x2ms buffer.
uaudio0: Record[0]: 44100 Hz, 1 ch, 16-bit S-LE PCM format, 2x2ms buffer.
uaudio0: Record[0]: 32000 Hz, 1 ch, 16-bit S-LE PCM format, 2x2ms buffer.
uaudio0: Record[0]: 22050 Hz, 1 ch, 16-bit S-LE PCM format, 2x2ms buffer.
uaudio0: Record[0]: 16000 Hz, 1 ch, 16-bit S-LE PCM format, 2x2ms buffer.
uaudio0: Record[0]: 11025 Hz, 1 ch, 16-bit S-LE PCM format, 2x2ms buffer.
uaudio0: Record[0]: 8000 Hz, 1 ch, 16-bit S-LE PCM format, 2x2ms buffer.
uaudio0: No MIDI sequencer.
pcm1: <USB audio> on uaudio0
uaudio0: HID volume keys found.
genet0: link state changed to DOWN
genet0: link state changed to UP
genet0: link state changed to DOWN
genet0: link state changed to UP
KLD snd_driver.ko: depends on snd_cmi - not available or version mismatch
mixer
pcm1:mixer: <USB audio> at ? kld snd_uaudio (play/rec) (default)
vol = 0.75:0.75 pbk
pcm = 0.75:0.75 pbk
mic = 0.25:0.25 pbk
Statistics: Posted by wb7odyfred — Sat Jan 13, 2024 8:19 pm